These will not work in a recessed AV switch hole as they will bottom out in the hilt. You need to use a AV switch box or a AV bezel.
MWS Long Latching 16mm AV Switch
The Yellow JST is the switch and the Red/Black JST is the LED.
Pre wired with 2x JST male connectors and a DynaOhm resistor for the LED.
For the MWS Petit Crouton the switch and LED can be plugged into the switch and accent LED connectors.
For the MWS BuckPuck the switch will plug into the switch connector and the LED will plug into the accent LED connector. You will need to jumper the accent LED resistor screw terminals with a piece of wire.
Since this is a Latching switch it will not work with the MWS Nano Biscotti.
MWS Long Latching 16mm AV Switch
The Yellow JST is the switch and the Red/Black JST is the LED.
Pre wired with 2x JST male connectors and a DynaOhm resistor for the LED.
For the MWS Petit Crouton the switch and LED can be plugged into the switch and accent LED connectors.
For the MWS BuckPuck the switch will plug into the switch connector and the LED will plug into the accent LED connector. You will need to jumper the accent LED resistor screw terminals with a piece of wire.
Since this is a Latching switch it will not work with the MWS Nano Biscotti.
You can be the first one to write a review.
