Empty Kylo Inspired MHS DIY Kit. These are leftover kits from a special project we did for an unnamed client and we do not have any information on any future runs beyond what is available currently. Only five of these kits are remaining and available.
These are all MHSv1 based parts
Includes 4x pre drilled 8-32 blade retention holes (2 on main blade, 1 on each side) and accepts 1" blades. No screws are included other than the four total being used to secure the side emitters. Side blade emitters contain a small wire passthrough for 1" heatsinks in each side. The main emitter heatsink is held in place via a 6-32 threaded hole placed slightly in the threads. Not compatible with the MHSv1 heatsinks and adapters. As these were designed as stunt props, there is no sound holes in the pommels. There is no switch setup on the hilt by default either.
11" Total Length
Total emitter width is 7"
These are all MHSv1 based parts
Includes 4x pre drilled 8-32 blade retention holes (2 on main blade, 1 on each side) and accepts 1" blades. No screws are included other than the four total being used to secure the side emitters. Side blade emitters contain a small wire passthrough for 1" heatsinks in each side. The main emitter heatsink is held in place via a 6-32 threaded hole placed slightly in the threads. Not compatible with the MHSv1 heatsinks and adapters. As these were designed as stunt props, there is no sound holes in the pommels. There is no switch setup on the hilt by default either.
11" Total Length
Total emitter width is 7"
