SPST Momentary short thread red ring Illuminated switch
The body below the head is .38" long
These will work with any box designed to hold 16mm switches and the recessed AV switch hole service. These will NOT work with the AVbezel or non recessed switch holes as the shaft is not long enough to fit the nut on.
There is no internal resistor on these so you need to use the correct resistor in order to not fry the LED. The LED has a forward voltage of 2V and runs at 20mA.
The body below the head is .38" long
These will work with any box designed to hold 16mm switches and the recessed AV switch hole service. These will NOT work with the AVbezel or non recessed switch holes as the shaft is not long enough to fit the nut on.
There is no internal resistor on these so you need to use the correct resistor in order to not fry the LED. The LED has a forward voltage of 2V and runs at 20mA.
You can be the first one to write a review.
){kind=link}